On this page▾
- The 30-second test
- Method 1: Forget the car for a permanent stop
- Method 2: Turn off Bluetooth before you get in
- Method 3: Lock CarPlay off entirely with Screen Time
- Fix 1: What if the car still reconnects after you forget it
- Method 4: Make the connection itself less annoying
- Ways to stop auto-connecting, compared
- Frequently Asked Questions
- Related guides
Forget the car under Settings → General → CarPlay for a permanent stop, or turn off Bluetooth before you get in to pause it for one trip. Wired CarPlay only connects while the cable is plugged in, so unplugging it already solves most of that version. There is no single system-wide "stop auto-connect" switch — just these three different levers, each suited to a different reason you want the screen to stay dark.
We build the CarPlay app mentioned further down this page, so we hear from drivers chasing the opposite of most CarPlay complaints. Most people email us when CarPlay won't connect at all. A smaller group wants the reverse: a car that launches CarPlay the moment the ignition turns, a rental or loaner they don't plan to keep paired, or a phone that keeps waking the screen at a red light they'd rather not touch.
The 30-second test
Figure out which lever you need before changing anything.
- Plug or unplug a cable to get CarPlay going? That's wired CarPlay — just don't connect the cable next time, and skip straight to Method 2 only if you also use wireless CarPlay in a second car.
- Does the CarPlay screen appear without you touching the phone, just from getting in and starting the engine? That's wireless CarPlay, and Method 1 or Method 2 below applies.
- Want it gone for this one drive only, or gone for good? A one-off pause and a permanent stop use two different settings — Method 2 for the first, Method 1 for the second.
Method 1: Forget the car for a permanent stop
This is the fix for a car you don't want your iPhone talking to again — a sold car, a rental you returned, or your own car if you'd rather plug in manually every time.
- Open Settings → General → CarPlay on the iPhone.
- Tap the car's name under My Cars.
- Tap Forget This Car, then confirm.
This erases the stored pairing completely, so the car no longer shows up as a known CarPlay connection. Next time you plug in or get in range, iOS treats it as a brand-new car and asks before connecting again, instead of launching CarPlay on its own.
When this will not work: forgetting the car on the iPhone only erases the iPhone's half of the pairing. Some cars keep their own record of the phone and will offer to reconnect anyway — that case is Fix 1 below. For the broader picture of how CarPlay pairing works, Apple's own CarPlay page is the primary source, not a third-party guess.
Method 2: Turn off Bluetooth before you get in
Wireless CarPlay starts with a Bluetooth handshake even though the actual screen runs over Wi-Fi once connected. No Bluetooth, no handshake, no CarPlay launch — for that drive only, without touching the car's pairing at all.
- Open Control Center and tap the Bluetooth icon off before starting the car.
- Drive the trip with CarPlay staying dark, the way you planned.
- Turn Bluetooth back on afterward if you use it for calls, AirPods, or your next drive.
When this will not work: if you rely on Bluetooth for anything else in the car — hands-free calls, a Bluetooth speaker, a smartwatch — this pause blocks those too, since it's one switch for all of Bluetooth, not just CarPlay.
Method 3: Lock CarPlay off entirely with Screen Time
This is the heaviest option, and the right one if you want CarPlay gone from every car the phone meets, not just one.
- Open Settings → Screen Time.
- Tap Content & Privacy Restrictions.
- Tap Allowed Apps, then turn off CarPlay.
With that toggle off, CarPlay won't launch in any car — wired or wireless, known or new — until you flip it back on with your Screen Time passcode. It's a reasonable lock for a shared phone or a kid's hand-me-down iPhone, but it's a lot of switch for one annoying car.
When this will not work: if you still want CarPlay in most cars and only want to stop one specific pairing, Method 1 is the narrower tool. This one turns CarPlay off everywhere at once.
Fix 1: What if the car still reconnects after you forget it
A CarPlay pairing has two halves: the record on your iPhone, and a separate record the car's own infotainment system keeps. Forgetting the car in Settings only clears the iPhone's side. If the car still remembers your phone, it can offer the connection again, and iOS can accept it automatically if Bluetooth is on.
- Open your car's own Bluetooth or paired-devices menu — the exact name varies by brand, so check your owner's manual for the right screen.
- Find your iPhone in that list and remove or forget it from the car's side too.
- Redo the Forget This Car step on the iPhone once more, so both halves are cleared at the same time.
When this will not work: a handful of older infotainment systems don't expose a per-device forget option at all. If that's your car, Method 2 (Bluetooth off before driving) is the more reliable repeat fix.
Method 4: Make the connection itself less annoying
Sometimes the real complaint isn't that CarPlay connects — it's that the same default chime and blank widget row greet you every single time, whether you wanted the screen up or not. That part you can change without touching any of the settings above.
Car Play Connect, rated 4.6 from 2,700+ App Store ratings, lets you pick a custom CarPlay connect sound — and a separate disconnect sound — from Sounds → Connect Sound in the app. The automatic connection still happens the way Methods 1 through 3 decide, but it sounds like something you chose instead of Apple's 2014-era default chime.
When this will not work: this doesn't stop or pause anything. If the connection itself is the problem, use Method 1, 2, or 3 above instead.
Ways to stop auto-connecting, compared
Pick the lever that matches how long you want CarPlay gone for.
| Method | Permanent? | What it needs | Honest limit |
|---|---|---|---|
| Forget This Car | Yes, until you re-pair | Settings → General → CarPlay, a few taps | Car may still offer to reconnect until you forget it on the car's side too |
| Turn off Bluetooth before driving | No — one trip only | A Control Center toggle | Also blocks any other Bluetooth use in the car that trip |
| Screen Time → Allowed Apps → CarPlay off | Yes, until you toggle back | A Screen Time passcode | Disables CarPlay entirely, on every car, not just the one bothering you |
| Unplug the cable (wired CarPlay only) | No — per trip | Nothing, just don't plug in | Doesn't apply to wireless CarPlay at all |
| Car Play Connect custom connect sound | Not applicable | Free app, Sounds → Connect Sound | Changes what happens when it connects, not whether it does |
Frequently Asked Questions
How do I stop CarPlay from automatically connecting?
Forget the car under Settings → General → CarPlay (tap the car, then Forget This Car) for a permanent stop. For a one-trip pause instead, turn off Bluetooth before you get in — wireless CarPlay needs that handshake to start. Wired CarPlay only connects while the cable is plugged in, so unplugging it solves it without touching a setting.
How do I turn off CarPlay on my iPhone?
There's no single power switch for CarPlay, since it only runs while your iPhone is linked to the car. Unplug the cable for a wired setup, or turn off Bluetooth and Wi-Fi for a wireless one, and the CarPlay screen ends on its own within a few seconds.
How do I disconnect CarPlay from my iPhone?
Unplug the USB cable, or turn off the car's ignition — either ends a wired session right away. For wireless CarPlay, turn off Bluetooth in Control Center, or open Settings → General → CarPlay, tap the connected car, and tap Disconnect if that option shows.
How do I disable CarPlay on my iPhone completely?
Go to Settings → Screen Time → Content & Privacy Restrictions → Allowed Apps, then turn off CarPlay. That blocks CarPlay from launching at all, on every car, until you switch it back on with your Screen Time passcode — more than most people need just to stop one car from connecting on its own.
Why does my CarPlay keep disconnecting on its own?
That's usually the opposite problem: a loose or charge-only USB cable, a dropped Bluetooth pairing, or a pending iOS update — not a setting you turned on. If you want CarPlay to stop connecting on purpose, use the Forget This Car step instead of chasing a cable fix for a drop you didn't cause.
How do I stop CarPlay from connecting for just one drive?
Turn off Bluetooth from Control Center before you start the car. Wireless CarPlay needs that Bluetooth handshake to begin, so it never launches that trip. For wired CarPlay, just don't plug in the cable. Either way, the car stays paired and connects normally again next time.
Related guides
- Custom CarPlay connection sound — swap Apple's default chime for one of your own, for the automatic connections you keep.
- CarPlay widgets — fill the screen that greets you with weather, clocks, battery, and more.
- Mount Mode for Tesla & older cars — a dashboard setup for cars that never pair with CarPlay at all.
- More CarPlay guides — setup, troubleshooting, and customization articles for the screen once it connects the way you want.



